The Nutrimatic is an easy to adjust partly preprogrammed second timer. The unit can be set to suit a 12 or 18 hour feed cycle. The cycle of the Nutrimatic is adjusted with the flick of the switch.
The duration of the drip can be determined through the second-adjustment. The Nutrimatic is preprogrammed for 19 drips during the programmed cycle of 12 or 18 hours.
The cycles are perfecly harmonized to the needs of the plants. The plant needs a lot water, when the light is switched on. During the day it needs less and less, and in the evening, when is's getting darker, it oly needs a little water.
You should programme the timer in that way, that the dripping times for smaller plants are shorter, for young plants can't bear so much fluid. When the plant gets bigger and bigger, it will need more and more water.
But be careful, the last 2 - 3 weeks you must reduce the water supply. The plant doesn't need much water then. If you keep on applying the same amount of water, proberbly mildew will occure.
The Nutrimatic is capable for hydroponic and aeroponic systems - IT IS NOT CAPABLE FOR SOIL !!!
Never run the Nutrimatic under permanent power! The Nutrimatic should run simultaneously with your lighting. The Nutrimatic should be switched on and off simultaneously with your lighting. To manage this, you plug it into the same board as your electronic ballasts, or you use an independent socket with a timer, that is programmed the same way as the ballast timers.
The Nutrimatic resets its schedule at the beginning of each lights on period.
An instruction sheet will be delivered with the unit, and you can download it here, too.
Adjustable Capacity Max 2000 watt
Input 230/240V Phase
ca. 12cm height
ca. 6cm width
ca. 5cm depth
|Product weight:||0,39 Kg|