Using the Heisenberg oil extractor
Attention: Due to the risk of explosion of the butane, all steps must be carried out outdoors! Do not use near fire or sparks. Do not smoke! A well ventilated room with open windows is not enough!
It is best to wear close-fitting clothing, goggles and gloves.
What do I need:
- the oil extractor with glass frit
- tight clothing
- safety goggles
- 1 small tub (no plastic)
- 1 large tub (no plastic)
Unscrew the cap with glass frit from the extractor.
Fill the extractor completely so that no airholes are formed.
Screw the cap from the extractor with the glass frit back on top.
Fill a pot or a tub with hot water, not more than max. 60°C.
Provide a smaller tub (not plastic) that fits into the larger tub to collect the product of exraction.
Keep away from sources of fire and sparks and hold the extrator with the lower small hole above the small tub, while the butane bottle is placed on top of the glass frit.
The glass frit serves as a filter and cover. Gloves should be worn because the extractor can become extremely cold due to the gas.
Spray first for about 30 sec., then wait for about 15 sec. and then continue spraying the butane bottle until it is empty.
Important: The gas must not be inhaled!
Then wait until all the oil is gathered in the small tub. The oil should be bright and transparent.
Now the small collecting tank can be placed with the oil for about 30-45 min in a water bath in the large tub with the hot water. As soon as the butane has completely disappeared, the oil stops bubbling.
Cooled down to about 21°C, the oil can now be safely carried into the house for use.
Length of tube: 19cm
Diameter: ca. 3,5cm
Charge: ca. 29ml
Please only use outdoor!
|Product weight:||0,32 Kg|